Showing posts with label magtek. Show all posts
Showing posts with label magtek. Show all posts

Friday, February 4, 2011

Read from Magtek card swipe reader in HID mode using libusb-win

This post deals with reading card swipe information from a Magtek USB Swipe Reader when set in HID mode. I used Visual Studio C++ Express Edition for a windows development environment. I installed libusb-win32 from http://www.libusb.org/wiki/libusb-win32
Create a C++ project in Visual studio, include the usb.h file and link the project with libusb.lib. Both of these are included in the libusb package.

The following can be used to read the card information-

// magtekusbhidcardswipe.cpp : Defines the entry point for the console application.
//
#include
#include

#include "stdafx.h"
#include "usb.h"

int _tmain(int argc, _TCHAR* argv[])
{
    struct usb_bus *busses;
    struct usb_bus *bus;
    struct usb_device *dev;
    int c, i, res;
    char data[337];
    char idata[10];

    usb_init();
    usb_find_busses();
    usb_find_devices();
    busses = usb_get_busses();
    for (bus = busses; bus; bus = bus->next) {

        for (dev = bus->devices; dev; dev = dev->next) {           
        if(dev->descriptor.idProduct == 2 && dev->descriptor.idVendor == 0x801) {
        printf("Product id: %04hx" ,dev->descriptor.idProduct);
        printf("Vendor id: %04hx \n" ,dev->descriptor.idVendor);
               
        usb_dev_handle *l_Handle = usb_open( dev);
        if( NULL == l_Handle ){
            printf( "usb_open(): no handle to device\n" );
        }
        res = usb_claim_interface(l_Handle, 0);
        if(res  < -EBUSY) {
            printf("Device interface not available to be claimed! \n");
            exit(0);
        }
        if(res < -ENOMEM) {
            printf("Insufficient Memory! \n");
            exit(0);
        }
        printf( "\nPlease swipe your card\n",res );
       
        res = usb_interrupt_read(l_Handle, 0x81, data, 337, -1);
        printf( "\nusb_interrupt_read %d \n",res ); 
       
        c=-1;
                //I am interested in only 10 characters in this range
        for(i=1;i<10;i++) {
            idata[++c] = data[i];
        }
        c=atoi(idata);
        printf( "\nMy data : %d\n",c);
       
        usb_release_interface(l_Handle, 0);            
        usb_close(l_Handle);
        }
       }
    }
    getchar();
    return 0;
}
 


Suggestions/improvements are welcome as always.